// Initialize the serial port static int __init serial_init(void) { // Map the serial port's I/O address io_base = ioremap(SERIAL_PORT, 0x10); if (!io_base) { return -ENOMEM; }
// Transmit data static void transmit_data(char *data, int len) { // Write data to the transmit hold register for (int i = 0; i < len; i++) { outb(io_base + THR, data[i]); } } 16c95x serial port driver
// Define the serial port's I/O address #define SERIAL_PORT 0x3F8 // Initialize the serial port static int __init
return 0; }
The 16C95X serial port driver is typically implemented as a kernel module or a device driver in the operating system. The driver interacts with the 16C95X serial port controller through a set of registers, which are mapped to specific addresses in the system's memory. if (!io_base) { return -ENOMEM
// Set the baud rate to 9600 bps outb(io_base + 0x03, 0x83); // LCR = 0x83 (DLAB = 1) outb(io_base + 0x00, 0x60); // RBR = 0x60 (baud rate = 9600) outb(io_base + 0x01, 0x00); // THR = 0x00 outb(io_base + 0x03, 0x03); // LCR = 0x03 (DLAB = 0)
// Enable interrupts outb(io_base + IER, 0x01); // IER = 0x01 (RDA interrupt enable)